The FL10-EA150 is a complete electric rear axle with a 150 kW permanent magnet motor and reduction gearbox built in, mounted coaxially on the axle line. It replaces the engine, gearbox, prop shaft and differential of a rear wheel drive vehicle with a single assembly that bolts on at the leaf springs.
With 350 Nm at the motor and up to 4,356 Nm at the wheels, it suits heavier rear drive vehicles such as pickups, vans, utility and off road vehicles. The axle is rated for a 2,400 kg rear load, runs on a 210 to 469 V pack, and is water cooled so it can share a coolant loop with the rest of the drivetrain.
The kit includes a vehicle control unit (VCU) already programmed for the E-Axle, so it is ready to run the axle without having to be configured from scratch.
Key specifications
| Model | FL10-EA150 |
|---|---|
| Type | 150 kW 3-in-1 coaxial electric rear axle |
| Motor type | Permanent magnet synchronous motor, flat wire winding |
| Cooling | Water cooled |
| Peak power | 150 kW |
| Peak motor torque | 350 Nm |
| Peak motor speed | 14,000 rpm |
| Peak current | 520 Arms or less |
| Rated voltage | 350 V DC |
| Working voltage range | 210 V to 469 V DC |
| Reduction ratio | 11.491 or 12.44 |
| Peak wheel torque | 4,021 Nm (11.491 ratio) or 4,356 Nm (12.44 ratio) |
| Rear axle load rating | 2,400 kg |
| Rear track | 1,710 mm |
| Leaf spring centre distance | 1,188 mm |
| Minimum ground clearance | 210 mm |
| Wheel rolling radius | 0.376 m |
| Axle tube | 90 mm OD, 7 mm wall |
| Wheel studs and PCD | M12 x 1.5, 139.7 mm PCD |
| Weight | 150 kg, excluding brakes |
Features
- Supplied with a VCU programmed for the E-Axle, ready to wire in
- Motor, reduction gearbox and axle in one assembly, so there is no prop shaft, gearbox or separate motor mount to design
- 150 kW and over 4,000 Nm at the wheels gives strong performance in heavy rear drive vehicles
- Leaf spring mounting means it can drop into many vehicles that already use a live rear axle
- 2,400 kg axle load rating for working vehicles that carry or tow
- Wide 210 to 469 V operating window suits most high voltage conversion packs
- Water cooled, so it can share the coolant loop with the pack, inverter and charger
- Coaxial layout keeps the motor on the axle line, leaving the chassis free for batteries
Choosing a ratio
Two reduction ratios are available. The 11.491 ratio gives a higher top speed, and the 12.44 ratio gives more torque at the wheels for towing, heavy loads or off road use. If you are not sure which suits your vehicle, contact us with the vehicle weight, tyre size and intended use and we will advise.
In the kit
1 x FL10-EA150 150 kW 3-in-1 coaxial rear E-Axle
1 x vehicle control unit (VCU), programmed for the E-Axle
Before you order
Check that the track, leaf spring centres, wheel PCD and ground clearance suit your vehicle. The quoted weight excludes brakes, so contact us if you need to confirm the brake hardware supplied. The axle is a large, heavy item and is delivered on a pallet, so a forklift or tail lift will be needed to unload it.
3D model
Drag to rotate. Use the buttons to zoom, or pinch on a touch screen.