150kW 3-in-1 Coaxial Rear E-Axle Kit

Price:

£ 6,989.99


6.6kW Bi-Directional On-Board Charger with 2.5kW DC/DC Converter
6.6kW Bi-Directional On-Board Charger with 2.5kW DC/DC Converter
£ 1,198.98
£ 1,198.98

150kW 3-in-1 Coaxial Rear E-Axle Kit

https://shop.fellten.com/web/image/product.template/24162/image_1920?unique=c55974f

£ 6,989.99 6989.99 GBP £ 6,989.99

£ 6,989.99

Not Available For Sale


This combination does not exist.


Share :
Terms and Conditions

Orders Dispatched Within 24 hours  - Excluding Weekends and Bank Holidays.

Worldwide Shipping
30 Days Return
Fast Delivery


The FL10-EA150 is a complete electric rear axle with a 150 kW permanent magnet motor and reduction gearbox built in, mounted coaxially on the axle line. It replaces the engine, gearbox, prop shaft and differential of a rear wheel drive vehicle with a single assembly that bolts on at the leaf springs.

With 350 Nm at the motor and up to 4,356 Nm at the wheels, it suits heavier rear drive vehicles such as pickups, vans, utility and off road vehicles. The axle is rated for a 2,400 kg rear load, runs on a 210 to 469 V pack, and is water cooled so it can share a coolant loop with the rest of the drivetrain.

The kit includes a vehicle control unit (VCU) already programmed for the E-Axle, so it is ready to run the axle without having to be configured from scratch.

Key specifications

ModelFL10-EA150
Type150 kW 3-in-1 coaxial electric rear axle
Motor typePermanent magnet synchronous motor, flat wire winding
CoolingWater cooled
Peak power150 kW
Peak motor torque350 Nm
Peak motor speed14,000 rpm
Peak current520 Arms or less
Rated voltage350 V DC
Working voltage range210 V to 469 V DC
Reduction ratio11.491 or 12.44
Peak wheel torque4,021 Nm (11.491 ratio) or 4,356 Nm (12.44 ratio)
Rear axle load rating2,400 kg
Rear track1,710 mm
Leaf spring centre distance1,188 mm
Minimum ground clearance210 mm
Wheel rolling radius0.376 m
Axle tube90 mm OD, 7 mm wall
Wheel studs and PCDM12 x 1.5, 139.7 mm PCD
Weight150 kg, excluding brakes

Features

  • Supplied with a VCU programmed for the E-Axle, ready to wire in
  • Motor, reduction gearbox and axle in one assembly, so there is no prop shaft, gearbox or separate motor mount to design
  • 150 kW and over 4,000 Nm at the wheels gives strong performance in heavy rear drive vehicles
  • Leaf spring mounting means it can drop into many vehicles that already use a live rear axle
  • 2,400 kg axle load rating for working vehicles that carry or tow
  • Wide 210 to 469 V operating window suits most high voltage conversion packs
  • Water cooled, so it can share the coolant loop with the pack, inverter and charger
  • Coaxial layout keeps the motor on the axle line, leaving the chassis free for batteries

Choosing a ratio

Two reduction ratios are available. The 11.491 ratio gives a higher top speed, and the 12.44 ratio gives more torque at the wheels for towing, heavy loads or off road use. If you are not sure which suits your vehicle, contact us with the vehicle weight, tyre size and intended use and we will advise.

In the kit

1 x FL10-EA150 150 kW 3-in-1 coaxial rear E-Axle
1 x vehicle control unit (VCU), programmed for the E-Axle

Before you order

Check that the track, leaf spring centres, wheel PCD and ground clearance suit your vehicle. The quoted weight excludes brakes, so contact us if you need to confirm the brake hardware supplied. The axle is a large, heavy item and is delivered on a pallet, so a forklift or tail lift will be needed to unload it.

axle-1080p-av1.mp4
Download
3D model

Drag to rotate. Use the buttons to zoom, or pinch on a touch screen.