An M10 shoulder bolt with a 12 mm diameter shoulder, 45 mm long, in self colour steel.
Fasteners in a high voltage build are not generic hardware. A bolt through a busbar carries current. A bolt into an enclosure holds a seal. A bolt into a mount takes drive torque. In each case the wrong material, the wrong head or the wrong length is a fault that only shows up later, and usually somewhere awkward to reach.
A shoulder bolt is a bearing surface with a thread on the end, and that is a different job from an ordinary bolt. The unthreaded 12 mm shoulder is ground to size so something can pivot or slide on it, while the M10 thread does the fastening. Use an ordinary bolt in that position and the part runs on a thread, which wears the bore and eventually seizes or rattles.
Torque matters more than tightness. Torque the thread, not the shoulder. The shoulder is meant to bottom against its seat and set the clamp length, so the part on it stays free to move.
Key specifications
| Part | FXM1012SB45SC |
|---|---|
| Type | Shoulder bolt, also called a stripper bolt |
| Thread | M10 thread, 12 mm shoulder |
| Length | 45 mm shoulder length |
| Drive | Socket |
| Material | Self colour steel |
| Sold as | Individually |
Features
- Ground 12 mm shoulder, so a part can pivot or slide on it properly
- M10 thread, for a secure fixing
- Self colour steel, for strength where corrosion resistance is not the priority
- Shoulder bottoms against its seat, setting the clamp length repeatably
Compatibility
For pivots, linkages and sliding joints needing a 12 mm bearing diameter with an M10 fixing. Self colour steel is uncoated, so in a wet or underfloor position it will need protecting.
Check the length against your stack before ordering. A bolt that bottoms out in a blind hole feels tight while clamping nothing, and one that is too short engages too few threads to hold. Count the thickness of everything the bolt passes through, plus the depth it needs in the thread.
In the box
- 1 x M10 x 45 mm shoulder bolt
Downloads
No document is published for this fastener. For the exact dimensions or material certification, contact us.